Direct Recommendation
Evaluate medium-voltage switchgear manufacturers by matching voltage, current, fault duty, feeder functions, breaker or load-break-switch duty, busbar scheme, protection, interlocks, cable terminations, drawings, tests, and manufacturing scope to one approved single-line diagram.
For substations, factories, power plants, infrastructure feeders, and EPC tenders, the useful deliverable is not another broad definition. It is a marked specification, a deviation list, and enough project information for a supplier to identify the correct equipment family. Start from Medium Voltage Switchgear; those pages define the current public Jinxing product scope.
Decision Summary
- Buyer intent: Supplier evaluation.
- Project context: substations, factories, power plants, infrastructure feeders, and EPC tenders.
- First evidence to prepare: the approved single-line diagram plus the equipment data sheet, load schedule, or feeder schedule that applies to this request.
- Expected supplier response: a model-family match, marked technical exceptions, applicable evidence, missing inputs, and a defined quotation boundary.
Product Scope Relevant to medium voltage switchgear manufacturers
The rows below are limited to products already published on the Jinxing website. Use them to identify the relevant family and voltage class, then verify the actual rating, arrangement, components, tests, and documents against the project specification.
| Jinxing product | Public voltage scope | Typical website application | Use this page to |
|---|---|---|---|
| HXGN-12/HXGN-24/HXGN-40.5 | 12kV / 24kV / 40.5kV | Ring networks and compact substations | Check the model family and send project-specific requirements |
| KYN28A-12/KYN28A-24/KYN61-40.5 | 12kV / 24kV / 40.5kV | Substations, factories, power plants | Check the model family and send project-specific requirements |
| JXHG-12/JXHG-24/JXHG-40.5 | 12kV / 24kV / 40.5kV | Feeder output and load distribution | Check the model family and send project-specific requirements |
Supplier qualification scorecard
A supplier name is not a technical acceptance criterion. Qualify the offered configuration and the evidence attached to it. For medium voltage switchgear manufacturers, the review should produce the following evidence or decision at each stage.
| Review area | Question to close | Evidence or output |
|---|---|---|
| Scope match | Does the offered family cover the specified voltage, duty, arrangement, and environment? | Compliant data sheet and marked exceptions |
| Engineering response | Are drawings and technical questions specific to the submitted project? | Reviewed data sheet, GA drawing, and deviation list |
| Verification | Which reports, routine tests, and inspection records apply to the quoted configuration? | Document register with model and rating scope |
| Commercial control | Are accessories, documents, packing, delivery, and exclusions explicit? | Complete quotation schedule and boundary list |
Stop and clarify the offer when any of these red flags appear:
- A quotation without a marked technical data sheet.
- Certificates shown without a clear model or rating scope.
- No written list of inclusions, exclusions, tests, and documents.
Six Technical Decisions to Record
These six decisions are selected for the supplier evaluation behind medium voltage switchgear manufacturers.
| Decision | Why it changes the offer | Required project input |
|---|---|---|
| Voltage class and ratio | Match the upstream supply, downstream system, insulation coordination, and local utility requirements. | Record the project value or mark it as an open voltage class and ratio clarification |
| Short-circuit duty | The single-line diagram and system study should define fault level, breaking duty, short-time withstand, and busbar requirements. | Record the project value or mark it as an open short-circuit duty clarification |
| Feeder function | Separate incomer, outgoing, transformer feeder, motor feeder, bus coupler, metering, and compensation duties. | Record the project value or mark it as an open feeder function clarification |
| Protection and coordination | Confirm breaker or fuse duty, relay functions, CT/VT inputs, selectivity, earthing, and upstream/downstream coordination. | Record the project value or mark it as an open protection and coordination clarification |
| Interlocks and operating sequence | Verify mechanical and electrical interlocks against the intended switching sequence and safety procedure. | Record the project value or mark it as an open interlocks and operating sequence clarification |
| Drawings and test documents | List required GA drawings, single-line diagrams, nameplate data, routine tests, report references, certificates, and shipping documents. | Record the project value or mark it as an open drawings and test documents clarification |
Engineering Review Notes
1. Voltage class and ratio
Match the upstream supply, downstream system, insulation coordination, and local utility requirements. In the context of substations, factories, power plants, infrastructure feeders, and EPC tenders, write this decision into the medium voltage switchgear manufacturers data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
2. Short-circuit duty
The single-line diagram and system study should define fault level, breaking duty, short-time withstand, and busbar requirements. In the context of substations, factories, power plants, infrastructure feeders, and EPC tenders, write this decision into the medium voltage switchgear manufacturers data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
3. Feeder function
Separate incomer, outgoing, transformer feeder, motor feeder, bus coupler, metering, and compensation duties. In the context of substations, factories, power plants, infrastructure feeders, and EPC tenders, write this decision into the medium voltage switchgear manufacturers data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
4. Protection and coordination
Confirm breaker or fuse duty, relay functions, CT/VT inputs, selectivity, earthing, and upstream/downstream coordination. In the context of substations, factories, power plants, infrastructure feeders, and EPC tenders, write this decision into the medium voltage switchgear manufacturers data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
5. Interlocks and operating sequence
Verify mechanical and electrical interlocks against the intended switching sequence and safety procedure. In the context of substations, factories, power plants, infrastructure feeders, and EPC tenders, write this decision into the medium voltage switchgear manufacturers data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
6. Drawings and test documents
List required GA drawings, single-line diagrams, nameplate data, routine tests, report references, certificates, and shipping documents. In the context of substations, factories, power plants, infrastructure feeders, and EPC tenders, write this decision into the medium voltage switchgear manufacturers data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
Applicable Evidence and Its Limits
The Jinxing website references GB/T 3906, IEC 62271 reference support for the relevant product families. These are standards families or project references to discuss. They are not a statement that every rating, arrangement, component, or optional test is automatically covered by the same document.
Public evidence available for early review includes:
For this supplier evaluation, request a document register that ties each report, certificate, drawing, and routine test to the quoted model or project. Sample evidence supports early qualification; final acceptance records must match the approved configuration and contractual inspection plan.
RFQ Package for medium voltage switchgear manufacturers
Use this product-specific structure instead of sending only a keyword, catalogue request, or target price.
| RFQ section | Information to provide |
|---|---|
| Single-line diagram | Voltage, current, bus scheme, incomers, outgoing feeders, bus couplers, and future ways |
| Fault and switching duty | Fault level, short-time withstand, breaker or load-break-switch duty, and earthing switch |
| Protection and control | CT/VT data, relays, meters, control voltage, communication, and interlock logic |
| Physical scope | Cable sizes and entry, dimensions, internal arc requirement, tests, drawings, and delivery target |
Add the project name, inquiry stage, destination country, quantity, local utility or owner rules, trade terms, and delivery target. If information is not yet available, mark it as "to be confirmed" so the quotation can separate assumptions from confirmed requirements.
Related Guide Cluster
Continue with the closest guides in this product cluster:
- Custom Medium-Voltage Switchgear RFQ Guide
- Metal-Clad vs Metal-Enclosed Switchgear
- Medium-Voltage Switchgear Testing Guide
Send the Project to Jinxing
Use the Jinxing inquiry form to send the single-line diagram and completed RFQ fields. Ask for the closest Jinxing product match, a list of missing technical inputs, applicable document references, and a quotation that states inclusions and exclusions.
Editorial Scope
Research and drafting were assisted by keyword and generative tools. Product names, routes, public voltage classes, application descriptions, and evidence links were checked against the current Jinxing website data used by this publication workflow. Final engineering, compliance, price, and delivery details require project-specific written confirmation.