Direct Recommendation
Medium-voltage switchgear testing should distinguish design or type evidence, supplier routine tests, agreed witness tests, incoming checks, and site functional or protection tests. The test list and acceptance criteria must follow the approved drawings, specification, and safety procedure.
For factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, the useful deliverable is not another broad definition. It is a marked specification, a deviation list, and enough project information for a supplier to identify the correct equipment family. Start from Medium Voltage Switchgear; those pages define the current public Jinxing product scope.
Decision Summary
- Buyer intent: Testing guide.
- Project context: factory acceptance, incoming inspection, commissioning preparation, and maintenance programs.
- First evidence to prepare: the approved single-line diagram plus the equipment data sheet, load schedule, or feeder schedule that applies to this request.
- Expected supplier response: a model-family match, marked technical exceptions, applicable evidence, missing inputs, and a defined quotation boundary.
Product Scope Relevant to medium voltage switchgear testing
The rows below are limited to products already published on the Jinxing website. Use them to identify the relevant family and voltage class, then verify the actual rating, arrangement, components, tests, and documents against the project specification.
| Jinxing product | Public voltage scope | Typical website application | Use this page to |
|---|---|---|---|
| HXGN-12/HXGN-24/HXGN-40.5 | 12kV / 24kV / 40.5kV | Ring networks and compact substations | Check the model family and send project-specific requirements |
| KYN28A-12/KYN28A-24/KYN61-40.5 | 12kV / 24kV / 40.5kV | Substations, factories, power plants | Check the model family and send project-specific requirements |
| JXHG-12/JXHG-24/JXHG-40.5 | 12kV / 24kV / 40.5kV | Feeder output and load distribution | Check the model family and send project-specific requirements |
Inspection and test stages
Separate design evidence, factory routine tests, agreed witness activities, incoming checks, and site commissioning because they prove different things. For medium voltage switchgear testing, the review should produce the following evidence or decision at each stage.
| Review area | Question to close | Evidence or output |
|---|---|---|
| Before manufacture | Approved data, drawings, test plan, and acceptance criteria | Signed document register and inspection plan |
| Factory | Nameplate, workmanship, routine tests, functional checks, and agreed witness points | Signed reports with serial or project reference |
| Delivery | Packing condition, accessories, damage, labels, and document completeness | Incoming inspection record |
| Before energization | Connections, earthing, insulation, protection, interlocks, settings, and operating sequence | Site test and commissioning record |
Stop and clarify the offer when any of these red flags appear:
- Using a type-test report as a substitute for routine tests.
- Testing without approved acceptance limits.
- Energizing before protection, earthing, and interlocks are verified.
Six Technical Decisions to Record
These six decisions are selected for the testing guide behind medium voltage switchgear testing.
| Decision | Why it changes the offer | Required project input |
|---|---|---|
| Inspection and acceptance | Agree document review, factory inspection, routine tests, witness points, packing checks, and site acceptance responsibilities. | Record the project value or mark it as an open inspection and acceptance clarification |
| Short-circuit duty | The single-line diagram and system study should define fault level, breaking duty, short-time withstand, and busbar requirements. | Record the project value or mark it as an open short-circuit duty clarification |
| Protection and coordination | Confirm breaker or fuse duty, relay functions, CT/VT inputs, selectivity, earthing, and upstream/downstream coordination. | Record the project value or mark it as an open protection and coordination clarification |
| Interlocks and operating sequence | Verify mechanical and electrical interlocks against the intended switching sequence and safety procedure. | Record the project value or mark it as an open interlocks and operating sequence clarification |
| Applicable standards | State the project standard and utility rules in the RFQ; do not assume a sample report applies to every final configuration. | Record the project value or mark it as an open applicable standards clarification |
| Drawings and test documents | List required GA drawings, single-line diagrams, nameplate data, routine tests, report references, certificates, and shipping documents. | Record the project value or mark it as an open drawings and test documents clarification |
Engineering Review Notes
1. Inspection and acceptance
Agree document review, factory inspection, routine tests, witness points, packing checks, and site acceptance responsibilities. In the context of factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, write this decision into the medium voltage switchgear testing data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
2. Short-circuit duty
The single-line diagram and system study should define fault level, breaking duty, short-time withstand, and busbar requirements. In the context of factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, write this decision into the medium voltage switchgear testing data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
3. Protection and coordination
Confirm breaker or fuse duty, relay functions, CT/VT inputs, selectivity, earthing, and upstream/downstream coordination. In the context of factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, write this decision into the medium voltage switchgear testing data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
4. Interlocks and operating sequence
Verify mechanical and electrical interlocks against the intended switching sequence and safety procedure. In the context of factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, write this decision into the medium voltage switchgear testing data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
5. Applicable standards
State the project standard and utility rules in the RFQ; do not assume a sample report applies to every final configuration. In the context of factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, write this decision into the medium voltage switchgear testing data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
6. Drawings and test documents
List required GA drawings, single-line diagrams, nameplate data, routine tests, report references, certificates, and shipping documents. In the context of factory acceptance, incoming inspection, commissioning preparation, and maintenance programs, write this decision into the medium voltage switchgear testing data sheet and ask the supplier to mark any deviation. The review output should be a value, drawing reference, calculation input, or explicit technical clarification rather than an unrecorded assumption.
Applicable Evidence and Its Limits
The Jinxing website references GB/T 3906, IEC 62271 reference support for the relevant product families. These are standards families or project references to discuss. They are not a statement that every rating, arrangement, component, or optional test is automatically covered by the same document.
Public evidence available for early review includes:
For this testing guide, request a document register that ties each report, certificate, drawing, and routine test to the quoted model or project. Sample evidence supports early qualification; final acceptance records must match the approved configuration and contractual inspection plan.
RFQ Package for medium voltage switchgear testing
Use this product-specific structure instead of sending only a keyword, catalogue request, or target price.
| RFQ section | Information to provide |
|---|---|
| Single-line diagram | Voltage, current, bus scheme, incomers, outgoing feeders, bus couplers, and future ways |
| Fault and switching duty | Fault level, short-time withstand, breaker or load-break-switch duty, and earthing switch |
| Protection and control | CT/VT data, relays, meters, control voltage, communication, and interlock logic |
| Physical scope | Cable sizes and entry, dimensions, internal arc requirement, tests, drawings, and delivery target |
Add the project name, inquiry stage, destination country, quantity, local utility or owner rules, trade terms, and delivery target. If information is not yet available, mark it as "to be confirmed" so the quotation can separate assumptions from confirmed requirements.
Related Guide Cluster
Continue with the closest guides in this product cluster:
- Medium-Voltage Switchgear Manufacturers Checklist
- Custom Medium-Voltage Switchgear RFQ Guide
- Metal-Clad vs Metal-Enclosed Switchgear
Send the Project to Jinxing
Use the Jinxing inquiry form to send the single-line diagram and completed RFQ fields. Ask for the closest Jinxing product match, a list of missing technical inputs, applicable document references, and a quotation that states inclusions and exclusions.
Editorial Scope
Research and drafting were assisted by keyword and generative tools. Product names, routes, public voltage classes, application descriptions, and evidence links were checked against the current Jinxing website data used by this publication workflow. Final engineering, compliance, price, and delivery details require project-specific written confirmation.